the PAR100EX, it was all about savings! With larger and larger MFD/PFD's
homebuilders and LSA manufacturers are finding it harder to install the
traditional rack and stack radios. The PAR100EX completely eliminates the need
for a stand alone radio. The small 3.4” X 2.5” X 4.7”
remote mounted radio can be mounted
in the audio panel is our highly acclaimed 4-place IntelliVox intercom. This new
audio panel even has the ability to set it for unusually high noise
environments. Even open cockpits.
we have taken what we have learned over the last 5 years of Bluetooth®
technology and making pairing of phone or Bluetooth® enable audio device is as easy
as can be.
builders and owners who are on the fence about selecting an intercom or audio
panel, the decision has just gotten so much easier.
you can have it all, even if you need only one radio. Get the PAR100EX which
will satisfy all of your intercom, switched and unswitched audio, entertainment,
and a Com Radio.
PAR100EX has fully independent power supplies so you can power up the radio or
audio panel individually, or together, it's what ever you want. And if you have
a Navigator/Com, you can use it as Com 1 and use our remote radio as Com 2.
PAR100EX uses the same tray and connector as the GMA240, GMA340, PMA8000 series.
However, there is additional wiring that is required to interface the Com Radio
to the audio panel.
included is the Monitor Mode, allowing to hear the Active and Standby
frequencies at the same time. When the Active becomes active, the Standby
frequency will become muted.
* GARMIN is a registered trademark of
Ltd. PS Engineering, Inc. is in no way affiliated with GARMIN,
PRICE: LIST $2595
For Service of the MicroAir Radio please go to
Remote Mounted Microair Radio built exclusively for PS Engineering, Inc.